Published at Friday, February 23rd 2018. by pedro in Curtain Design.
Curtain tracking can be attached to solid or false/drop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole. As a screw is inserted into the anchor; the anchor expands and grabs firmly to the ceiling. Drop down/false ceilings require clips which are attached to the ceiling grid. There is a hole tapped into each clip that accepts a screw from the curtain tracking. These clips should be placed every 30.
A window management of curtains can add a extraordinary lay a hand on to a room or a window and can also add a measure of privacy. Whatever conclusion you take, a window management of curtains can not only add some shade or consistency to a room, but also can sometimes solve problems you may have with a window. There are many types of curtains and drapes to choose from. One of the most common is the box pleated curtain or drape. These curtains are pre-gathered into pleats at the top of the curtain so that they always have a neat, tailored look.
Quality curtain tracking is made of 16 gauge extruded aluminum and is typically sold in eight foot lengths. If shorter lengths are required, tracking may be easily cut down with a hacksaw. Curves pre-bent to 45 deg. and 90 deg. are available for applications requiring the curtain to bend around a room; curves are 2 feet by 2 feet and bent at a 12 inch radius.
Whether you are cordoning off sections of a tattoo parlor, healthcare facility, photography studio, laboratory, class room or a home, curtain tracking has become an easily accessible tool. Selection and installation of curtains and curtain tracking is not rocket science, but here are some pointers to smooth the process.
An end-stop should be placed at both ends of the curtain tracking setup. Curtain tracking end-stops are used to prevent curtain carriers from slipping out. One end should contain a snap out fitting to allow for easy installation and replacement of curtain carriers. Snap out fittings sit inside an end-stop and are easily removed. Removal is necessary to install or replace your curtain carriers without removing the curtain tracking from the ceiling.
Any content, trademark’s, or other material that might be found on the mydailycuppa website that is not mydailycuppa’s property remains the copyright of its respective owner/s. In no way does mydailycuppa claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 mydailycuppa. All Rights Reserved.