Published at Sunday, March 11th 2018. by pedro in Staircase Design.
Not all stairways have exactly the same stair parts take the stairs that have open risers for an example. There are basic rules and principles that need to be followed in building staircases in order to make them safe from danger.
Also keep an eye out for splinters and just sand and finish to get rid of them. Get your steps checked for mold every now and then if they are near a damp place like the basement. Leaving that for a long time will give you a lot more problem in the future.
But before arriving at the finished product, one must go through a lot of planning and decision-making. Both function and design should be considered all through-out the planning process, even up to the building stage.
Another good and useful rule of thumb is that the total of the length of the tread and the riser should not exceed 17 . This is the standard used to create comfortable stairs in most establishments. But keep in mind that the riser should not exceed the length of the tread, the vice versa is much more practical. For example, the length of the riser is 8 and the tread is 9 , when added makes 17 , making it pass the standards for comfortable stair climbing.
See, there are a lot of ways to go for your staircase design. These tips will hopefully guide you in your quest for designing your dream staircase.
Any content, trademark’s, or other material that might be found on the mydailycuppa website that is not mydailycuppa’s property remains the copyright of its respective owner/s. In no way does mydailycuppa claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 mydailycuppa. All Rights Reserved.