Published at Saturday, February 17th 2018. by pedro in Curtain Design.
Suspension tubing may be used with high ceilings or if existing obstructions prevent the curtain tracking from being mounted directly to the ceiling. Suspension tubing is available in 8 foot lengths and made with 7/8 O.D. hollow aluminum tubing. Suspension tubing can be attached directly to solid ceilings with a ceiling flange or via ceiling clips to a drop down/false ceiling. A screw insert is then placed in the bottom of the suspension tubing allowing the curtain tracking to be attached. Suspension tubing should be placed every six feet and the tracking ends can be attached to a wall with a nylon wall bracket.
Curtain tracking can be attached to solid or false/drop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole. As a screw is inserted into the anchor; the anchor expands and grabs firmly to the ceiling. Drop down/false ceilings require clips which are attached to the ceiling grid. There is a hole tapped into each clip that accepts a screw from the curtain tracking. These clips should be placed every 30.
It can be difficult to choose curtains with so many influencing factors. To make curtain shopping more enjoyable and easy consider making your purchase from a reputable company with many years of industry experience. Your chosen retailer can offer you advice and customer assistance for your curtain purchases, ensuring you get the correct curtain for your home, the first time.
Quality curtain tracking is made of 16 gauge extruded aluminum and is typically sold in eight foot lengths. If shorter lengths are required, tracking may be easily cut down with a hacksaw. Curves pre-bent to 45 deg. and 90 deg. are available for applications requiring the curtain to bend around a room; curves are 2 feet by 2 feet and bent at a 12 inch radius.
Anodized aluminum splicing clamps join multiple pieces of tracking to ensure proper alignment of the channels. This will allow the carriers/rollers to move freely from one piece of tracking to the next. Clean and smooth the ends of each piece of track before assembly; burrs may cause the carriers/rollers to hang up.
Any content, trademark’s, or other material that might be found on the mydailycuppa website that is not mydailycuppa’s property remains the copyright of its respective owner/s. In no way does mydailycuppa claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 mydailycuppa. All Rights Reserved.