Published at Friday, 23 February 2018. Curtain Design. By pedro.
Drop chains and PVC drop strips are available for use when ventilation space is required and a mesh top curtain is not an option. A drop chain is 18 long with custom lengths available; it is constructed of nickel-plated steel. A PVC drop strip is 18 long with a hole on top which slips over the curtain carrier; a plated hook at the bottom connects to the cubicle curtain.
An end-stop should be placed at both ends of the curtain tracking setup. Curtain tracking end-stops are used to prevent curtain carriers from slipping out. One end should contain a snap out fitting to allow for easy installation and replacement of curtain carriers. Snap out fittings sit inside an end-stop and are easily removed. Removal is necessary to install or replace your curtain carriers without removing the curtain tracking from the ceiling.
Curtain tracking can be attached to solid or false/drop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole. As a screw is inserted into the anchor; the anchor expands and grabs firmly to the ceiling. Drop down/false ceilings require clips which are attached to the ceiling grid. There is a hole tapped into each clip that accepts a screw from the curtain tracking. These clips should be placed every 30.
Any content, trademark’s, or other material that might be found on the mydailycuppa website that is not mydailycuppa’s property remains the copyright of its respective owner/s. In no way does mydailycuppa claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 mydailycuppa. All Rights Reserved.