Published at Wednesday, November 01st 2017. by pedro in Curtain Design.
Quality curtain tracking is made of 16 gauge extruded aluminum and is typically sold in eight foot lengths. If shorter lengths are required, tracking may be easily cut down with a hacksaw. Curves pre-bent to 45 deg. and 90 deg. are available for applications requiring the curtain to bend around a room; curves are 2 feet by 2 feet and bent at a 12 inch radius.
Choosing the right kitchen curtain for you can be a enormous way to exhibit your own style and taste. Curtains can convert your kitchen in incredible ways. However, you might be perplexed about the many available choices there are. However, if you know what kitchen curtains are about, and then you can taper down your selections. People get kitchen curtains for two main reasons apart from aesthetic qualities. Curtains are used to filter light or to keep ones privacy. Some people get kitchen curtains for both reasons. You should determine whether you want the kitchen curtains to be mostly opened or mostly closed. This greatly influences the preference of materials and design of curtains.
Curtains with shorter lengths might look a bit awkward, but are ideal to provide a casual and relaxed atmosphere to any room. Long length curtains have another advantage besides being an ambiance enhancer. All ready-made curtains and draperies that are available from curtain suppliers may not suit your requirements, and hence you can go for long length curtains. By doing a length alteration, you can make these curtains easily tailor-made.
Curtain tracking can be attached to solid or false/drop down ceilings using screws or clips. Attaching the tracking to a solid ceiling requires the use of screws; screw directly into ceiling studs whenever possible. Holes will need to be drilled into the tracking at each attaching point. It is not always possible to screw into a stud. When this occurs, the use of an anchor is necessary. An anchor is pressed into a pre-drilled hole. As a screw is inserted into the anchor; the anchor expands and grabs firmly to the ceiling. Drop down/false ceilings require clips which are attached to the ceiling grid. There is a hole tapped into each clip that accepts a screw from the curtain tracking. These clips should be placed every 30.
An end-stop should be placed at both ends of the curtain tracking setup. Curtain tracking end-stops are used to prevent curtain carriers from slipping out. One end should contain a snap out fitting to allow for easy installation and replacement of curtain carriers. Snap out fittings sit inside an end-stop and are easily removed. Removal is necessary to install or replace your curtain carriers without removing the curtain tracking from the ceiling.
Any content, trademark’s, or other material that might be found on the mydailycuppa website that is not mydailycuppa’s property remains the copyright of its respective owner/s. In no way does mydailycuppa claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 mydailycuppa. All Rights Reserved.